M2011® Portable Dual FID Analyser

Emissions & Process Testing

PCF’s M2011® Portable Dual FID Analyser VOC/THC/CH4 analyser has been designed and built according to the EN 113526 – EN 12619 European directives for the measurement of VOC, THC and CH4 fractions in stack emissions. With the M2011® Portable Dual FID Analyser, the sample is extracted through a variable length probe fitted with a top filter connected to the analyser with a heat traced (150- 180°C) PTFE tube. In addition a safety filter is located upstream of the sample capillary. The sample is continuously flowing through the CH4 and THC proprietary FID detectors, ensuring fast response time, simultaneous and continuous monitoring of THC, CH4 and NMHC. The integral analyser gas path as well as the sampling pump are regulated and maintained above sample dew point.

PCF’s M2011® Portable Dual FID Analyser for continuous and simultaneous monitoring of THC, NMHC and CH4.

Brochure

M2011® Portable FID analyser

Exclusive features – Measured Gases

Combination of GC and FID methods for Online monitoring of THC, CH4 and NMHC	M2011® Portable Analyser with Ch4 and THC proprietary FID detectors (Hot FID)
Keyboard / LCD display interface for configuration & calibration	Built-in automatic ignition
Modular and universal high performance associated gas sampling system	Fully automatic standalone system for fast, accurate and reliable analysis of THC, CH4 and NMHC

Built-in DAS (Data Acquisition System) / Data storage on flash memory	Heated gas path and Integral heated sampling pump
Fast response time, T90 within 3 sec / High stability – Minimal drift	Downloading through USB port
Heavy duty aluminium case with leather strap	Catalytic separation of Methane Fraction with built in zero air generator

GAS	FULL RANGE	LoD
THC	10 to 500 ppm	0.02 ppm
CH4	10 to 500 ppm	0.02 ppm
NMHC	10 to 500 ppm	0.02 ppm

The separation of methane fraction is based on the chromatographic method. Once specified the CH4 is measured separately and then subtracted from Total Hydrocarbons concentrations. The measuring sequences are managed by the built-in 10 port rotation valves enabling sequential measurement of THC, CH4 and NMHC. A zero calibration cycle triggered automatically before each measuring cycle guarantees a high signal stability and efficient drift compensation.

The same technology can be adapted to specific VOCs stack emissions monitoring and process control needs. The coupling of gas chromatography separation with state of the art FID detector allows accurate and reliable measurement of Benzene (C6H6), Ethylene (C2H4), Propylene (C3H6), Styrene (C8H8), Acetone (C3H6O), Formaldehyde (CH2O) and many others VOCs.

GAS	FULL RANGE	LoD	ACCURACY
Benzene C6H6	0-10 / 0-20 / 0-50 / 0-100 /0-200 / 0-500 ppm	0.05 ppm	1% full scale
Ethylene /Ethylene Oxide (ETO) C2H4	0-10 / 0-20 / 0-50 / 0-100 /0-200 / 0-500 ppm	0.02 ppm	1% full scale
Propylene / Propylene Oxide C3H6	0-10 / 0-20 / 0-50 / 0-100 /0-200 / 0-500 ppm	0.02 ppm	1% full scale
Styrene C8H8	0-10 / 0-20 / 0-50 / 0-100 /0-200 / 0-500 ppm	0.5 ppm	1% full scale
Acetone CH36O	0-10 / 0-20 / 0-50 / 0-100 /0-200 / 0-500 ppm	0.5 ppm	1% full scale
Formaldehyde CH2O	0-10 / 0-20 / 0-50 / 0-100 /0-200 / 0-500 ppm	0.1 ppm	1% full scale

M2011® Sampling System

APP Portable Gas Sampling Probe

The APP portable gas sampling probe is especially designed for portable applications where easy handling, safe and reliable operation as well as easy maintenance are required. The low weight and innovative design guarantees a perfect operation in a wide range of conditions for short and medium term mobile measurements.

Brochure

AHL Heated Sample Lines

The AHL electrically heated sample lines series is designed for connecting to all type of sampling equipment. The use of heated line ensures that the gas components in the sample stream remain above their respective dew point and thereby eliminates the risk of condensation.

Brochure

Portable Sampling System

Heated Sampling Pump

For long lengths of sampling line, the use of a AMP 510 Heated Sampling Pump allows increasing the sampling rate for fast online VOCs and THCs monitoring.

Brochure

Stack Testing Equipment

Gas conditioners, Sampling Probes, Multigas Analysers, Handheld Units and more…

M2011® – THC, NMHC and CH4 Portable Dual Hot FID Analyser

Typical Applications

Process gas and emissions monitoring in combustion plants, boilers, syngas, biogas, waste recycling facilities (Waste to Energy) and associated filtration systems are typical applications for the M2011® Portable FID Analyser – THC, NMHC and CH4 online FID analyser.

Landfills, Biogas Plants, Incinerators

“Landfilling” is the main method for disposal of municipal and household solid wastes or refuses in Australia. Although maintained in an oxygen-free environment and relatively dry conditions, landfill waste produces significant amounts of landfill gas (mostly methane). The M2011® Portable FID Analyser enables process and air pollution emissions monitoring from solid waste landfills. Landfills operations require the control of methane CH4 and non-methane organic compound emissions (NMHC) emitted.

Landfills, Biogas Plants, Incinerators, wastewater treatment plant, refineries requires detailed monitoring of the process conditions. Therefore, it is recommended to monitor both the volume of gas produced and the gas composition. With regard to process monitoring, a change in either gas production or gas composition can be an indicator of process imbalance.

THC, NMHC and CH4 measured during the methanation process give a good overall view of the performance of the degradation process and bacterial activity. A decrease in methane content can be a first sign of organic overload, provided that the feedstock mix has not recently changed.

Simultaneous real-time monitoring of THC, NMHC and CH4 empowers process automation (i.e. operation of scrubbers).

THC, NMHC and CH4 Continuous Stack Emissions Monitoring required for environmental compliance

Thermal Oxidiser

Thermal oxidisers are typically used to eliminate HAPs and VOCs from industrial air streams . These pollutants are generally hydrocarbon based and when destroyed via thermal combustion they are chemically oxidized to form CO2 and H2O. The temperature needs to be high enough to ignite the waste gas. Most organic compounds ignite at the temperature between 590°C and 650°C. Accuracy and high reliability in harsh conditions of operations makes the M2011® Portable Dual Hot FID Analyser – THC, NMHC and CH4 a powerful optimisation tool for thermal oxidisers. GTC and thermal oxidisers reduce the emissions of pollutants such as Volatile Organic Compounds (VOC). Online monitoring of THC, NMHC and CH4 upstream of the Thermal Oxidiser enables optimal process optimisation.

PCF user references

Stack Testing Equipment

Gas conditioners, Sampling Probes, Multigas Analysers, Handheld Units and more…

M2001® – THC, NMHC and CH4 Portable FID Analyser

Typical Applications

Process gas and emissions monitoring in combustion plants, boilers, syngas, biogas, waste recycling facilities (Waste to Energy) and associated filtration systems are typical applications for the M2001® Portable FID Analyser – THC, NMHC and CH4 online FID analyser.

Landfills, Biogas Plants, Incinerators

“Landfilling” is the main method for disposal of municipal and household solid wastes or refuses in Australia. Although maintained in an oxygen-free environment and relatively dry conditions, landfill waste produces significant amounts of landfill gas (mostly methane). The M2001® Portable FID Analyser enables process and air pollution emissions monitoring from solid waste landfills. Landfills operations require the control of methane CH4 and non-methane organic compound emissions (NMHC) emitted.

THC, NMHC and CH4 measured during the methanation process give a good overall view of the performance of the degradation process and bacterial activity. A decrease in methane content can be a first sign of organic overload, provided that the feedstock mix has not recently changed.

Simultaneous real-time monitoring of THC, NMHC and CH4 empowers process automation (i.e. operation of scrubbers).

THC, NMHC and CH4 Continuous Stack Emissions Monitoring required for environmental compliance

Thermal Oxidiser

Thermal oxidisers are typically used to eliminate HAPs and VOCs from industrial air streams . These pollutants are generally hydrocarbon based and when destroyed via thermal combustion they are chemically oxidized to form CO2 and H2O. The temperature needs to be high enough to ignite the waste gas. Most organic compounds ignite at the temperature between 590°C and 650°C. Accuracy and high reliability in harsh conditions of operations makes the M2001® Portable FID Analyser – THC, NMHC and CH4 a powerful optimisation tool for thermal oxidisers. GTC and thermal oxidisers reduce the emissions of pollutants such as Volatile Organic Compounds (VOC). Online monitoring of THC, NMHC and CH4 upstream of the Thermal Oxidiser enables optimal process optimisation.

Emissions & Process Testing

M2011® Portable FID analyser

M2011® Sampling System

APP Portable Gas Sampling Probe

AHL Heated Sample Lines

Heated Sampling Pump

Stack Testing Equipment

M2011® – THC, NMHC and CH4 Portable Dual Hot FID Analyser

Typical Applications

Landfills, Biogas Plants, Incinerators

Thermal Oxidiser

PCF user references

Stack Testing Equipment

M2001® – THC, NMHC and CH4 Portable FID Analyser

Typical Applications

Landfills, Biogas Plants, Incinerators

Thermal Oxidiser

PCF user references

SERVICES & PRODUCTS ENQUIRIES

PRODUCTS

PARTNERS

APPLICATIONS